HP b2600 Technical Reference page 202

Remove/Replace Flexible Disk Drives
Replacing the Flexible Disk Drive
4. Run the power and SCSI cables through the back of the flexible disk drive bay to the front. See
.
Figure G-12
Figure G-12 Running the SCSI and Power Cables through the Disk Drive's Bay
Flexible Disk
Drive's Bay
SCSI Cable
5. Connect the flexible disk drive's power and SCSI cables. See
are not keyed, so when you replace the SCSI cable, you will need to line up the red line on the
SCSI cable with the right side of the flexible disk drive's SCSI connector, as viewed in
.
G-13
Figure G-13 Connecting the Flexible Disk Drive's Cables
SCSI Cable
Flexible Disk
Drive
202
Power Cable
. Note that these cables
Figure G-13
Flexible Disk
Drive Bay
Figure
Red Line
Power Cable
Pin 1 of the
Connector
Appendix G