HP b2600 Technical Reference page 165

Table C-1. Chassis Codes for B2600 Workstations
Ostat Code FRU
WRN CB73 SYS BD
FLT CB9r SYS BD
FLT CB99 SYS BD
FLT CB9A SYS BD
OFF CBA1 SYS BD
OFF CBA2 SYS BD
OFF CBA3 SYS BD
OFF CBA4 SYS BD
OFF CBA5 SYS BD
OFF CBA6 SYS BD
OFF CBA7 SYS BD
OFF CBB1 SYS BD
OFF CBB2 SYS BD
OFF CBB3 SYS BD
OFF CBB4 SYS BD
OFF CBB6 SYS BD
OFF CBB8 SYS BD
OFF CBBA SYS BD
OFF CBBC SYS BD
OFF CBBE SYS BD
OFF CBC0 SYS BD
Appendix C
Message
TOC occurred
Error on roper
seed IVA handler
HPMC overwrite
AIOC int dat err
EtoA rope perr
access invld TLB
EtoA rp cmd perr
CDF timeout
R2PCI resp tmout
Unknown AIOC err
PCI timeout
PCI timeout; OV
R2PCI intrnl err
R2PCI int err;OV
PCI data req err
PCI D req err;OV
PCI data par err
PCI Dpar err;OV
R2PCI intrnl err
R2PCI int err;OV
HP B2600 Chassis Codes
Description
A Transfer of Control caused entry to
PDCE_CHECK (the firmware trap
handler).
An error was detected on rope r.
PDC_SEED_ERROR triggered an HPMC.
Firmware is overwriting PIM data from a
previous HPMC.
I/O controller internal error.
Parity error between I/O controller and
Rope-to-PCI bridge.
An invalid I/O TLB entry was accessed.
Command parity error between I/O
controller and Rope-to-PCI bridge.
Rope Command/Data FIFO is backed up.
Rope-to-PCI bridge timed out. Could be a
failure of the PCI card, rope, or R2PCI
bridge.
Unknown I/O controller error.
A PCI card requested the bus but failed to
use it.
More than once aPCI card requested the
bus but failed to use it.
Rope-to-PCI bridge internal error.
Multiple Rope-to-PCI bridge internal
errors.
PCI bus data requestor error: R2PCI
detected PERR# assertion.
Rope-to-PCI bridge detected multiple
PERR# assertions.
PCI bus data parity error.
Multiple PCI bus data parity errors.
Error in R2PCI internal data to PCI bus.
Multiple R2PCI internal data to PCI bus
errors.
Chassis Codes
165