Integrated Peripherals - Gigabyte GA-MF3 User Manual

2-3

Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
RAID Config
On-Chip Primary PCI IDE
On-Chip Secondary PCI IDE
IDE DMA transfer
Serial-ATA 2(Internal PHY)
SATA DMA transfer
USB Memory Type
AC97 Audio
On-Chip LAN(nVIDIA)
OnBoard LAN Boot ROM
Onboard Serial Port 1
Onboard Serial Port 2
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
USB Host Controller
Legacy USB Keyboard/Storag
Legacy (DOS) USB Mouse
Legacy USB storage detect
: Move Enter: Select
F5: Previous Values
RAID Config
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
NV SATA RAID function
SATA Primary Master RAID
SATA Secndry Master RAID
: Move Enter: Select
: Move Enter: Select
F5: Previous Values
F5: Previous Values
NV SATA RAID function
Enabled Allows users to configure individual SATA channels as RAID or ATA mode.
(Default value)
Disabled Disable the RAID function for all of the onboard SATA channels.
SATA Primary Master RAID
Enabled Enable RAID function for the first channel of the first SATA controller.
Disabled Disable the RAID function of this channel. It will operate in ATA mode.(Default
value)
SATA Secndry Master RAID
Enabled Enable RAID function for the second channel of the first SATA controller.
Disabled Disable the RAID function of this channel. It will operate in ATA mode. (Default
value)
GA-MF3 Motherboard
Integrated Peripherals
[Press Enter]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[SHADOW]
[Auto]
[Auto]
[Disabled]
[3F8/IRQ4]
[2F8/IRQ3]
[378/IRQ7]
[SPP]
3
[V1.1+V2.0]
[Disabled]
[Disabled]
[Enabled]
+/-/PU/PD: Value F10: Save
F7: Optimized Defaults
RAID Config
[Enabled]
[Disabled]
[Disabled]
+/-/PU/PD: Value F10: Save
+/-/PU/PD: Value F10: Save
F7: Optimized Defaults
F6: Fail-Safe Defaults
- 36 -
Item Help
Menu Level
ESC: Exit F1: General Help
Item Help
Menu Level
ESC: Exit F1: General Help
ESC: Exit F1: General Help
F7: Optimized Defaults