Mb Intelligent Tweaker(M.i.t.) - Gigabyte GA-MF3 User Manual

2-7

MB Intelligent Tweaker(M.I.T.)

CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
CPU Frequency (MHz)
AGP Clock (MHz)
CPU Clock Ratio
DDR2 voltage control
AGP voltage Control
CPU Voltage Control
: Move Enter: Select
F5: Previous Values
Incorrectly using these features may result in system instability or corruption.
Doing a overclock or overvoltage on CPU, chipsets and memory modules may result in
damages or shortened life expectancy to these components.
Please be aware that the M.I.T. menu items are for power users only.
CPU Frequency(MHz)
200~455 MHz
AGP Clock(MHz)
66MHz ~ 100MHz
CPU Clock Ratio
The adjustable range is dependent on the CPU you install. (Default: Auto)
DDR2 voltage Control
Please note that by overclocking your system through the increase of the DDR2 voltage, damage
to the memory may occur.
Normal
+0.1V ~ +0.5V
Incorrect using it may cause your system broken. For power End-User use only!
AGP voltage Control
Normal
+0.1V ~ +0.3V
Incorrect using it may cause your system broken. For power End-User use only!
CPU Voltage Control
Supports adjustable CPU Vcore. The adjustable range is dependent on CPUs. (Default value:
Normal)
Please note that by overclocking your system through the increase of the CPU voltage, damage
to the CPU or decrease in the CPU life expectancy may occur.
MB Intelligent Tweaker(M.I.T.)
[200]
[66]
[Auto]
[Normal]
[Normal]
[Normal]
+/-/PU/PD: Value F10: Save
F7: Optimized Defaults
Set CPU Frequency from 200 MHz to 455 MHz.
Set AGP Frequency from 66 MHz to 100 MHz.
Supply DDR2 voltage as DDR2 requires. (Default value)
Increase DDR2 voltage by +0.1V to +0.5V.
Supply AGP voltage as (G) MCH requires. (Default value)
Increase AGP voltage by +0.1V to +0.3V.
- 43 -
Item Help
Menu Level
ESC: Exit F1: General Help
BIOS Setup