Gigabyte GA-MF3 User Manual page 37

On-Chip Primary PCI IDE
Enabled Enable onboard 1st channel IDE port. (Default value)
Disabled Disable onboard 1st channel IDE port.
On-Chip Secondary PCI IDE
Enabled Enable onboard 2nd channel IDE port. (Default value)
Disabled Disable onboard 2nd channel IDE port.
IDE DMA transfer
Enabled Detect the IDE UDMA automatically. (Default value)
Disabled Disable this function.
Serial-ATA 2 (Internal PHY)
Enabled Enable Serial ATA supported. (Default value)
Disabled Disable Serial ATA supported.
SATA DMA transfer
Enabled Detect the SATA UDMA automatically. (Default value)
Disabled Disable this function.
USB Memory Type
SHADOW Set USB Memory Type to SHADOW. (Default value)
Base Memory (640K)
Set USB Memory Type to Base Memory (640K).
AC97 Audio
Auto Enable onboard AC'97 audio function. (Default value)
Disabled Disable this function.
On-Chip LAN (nVIDIA)
Auto Auto-detect onboard LAN function. (Default value)
Disabled Disable onboard LAN function.
OnBoard LAN Boot ROM
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled Enable this function.
Disabled Disable this function. (Default value)
Onboard Serial Port 1
Auto BIOS will automatically setup the port 1 address.
3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value)
2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8/IRQ3.
3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8/IRQ4.
2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8/IRQ3.
Disabled Disable onboard Serial port 1.
- 37 - BIOS Setup