Pc Health Status - Gigabyte GA-MF3 User Manual

2-6

PC Health Status

CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
Vcore
DDR2 18V
+3.3V
+12V
Current CPU Temperature
Current CPU FAN Speed
Current SYSTEM FAN Speed
CPU Warning Temperature
CPU FAN Fail Warning
SYSTEM FAN Fail Warning
CPU Smart FAN Control
CPU Smart FAN Mode
: Move Enter: Select
F5: Previous Values
Current Voltage(V) Vcore / DDR2 18V / +3.3V / +12V
Detect system's voltage status automatically.
Current CPU Temperature
Detect system/CPU temperature automatically.
Current CPU/SYSTEM FAN Speed (RPM)
Detect CPU/system fan speed status automatically.
CPU Warning Temperature
60 C / 140 F Monitor CPU temperature at 60
o o
70 C / 158 F Monitor CPU temperature at 70
o o
80 C / 176 F Monitor CPU temperature at 80
o o
90 C / 194 F Monitor CPU temperature at 90
o o
Disabled Disable this function. (Default value)
CPU/SYSTEM FAN Fail Warning
Disabled Disable CPU/system fan fail warning function. (Default value)
Enabled Enable CPU/system fan fail warning function.
CPU Smart FAN Control
Disabled Disable this function.
Enabled When this function is enabled, CPU fan will run at different speed depending
on CPU temperature. Users can adjust the fan speed with Easy Tune based on
their requirements. (Default value)
CPU Smart FAN Mode
This option is available only when CPU Smart FAN Control is enabled.
Auto BIOS autodetects the type of CPU fan you installed and sets the optimal CPU
Smart FAN control mode for it. (Default value)
Voltage Set to Voltage when you use a CPU fan with a 3-pin fan power cable.
PWM Set to PWM when you use a CPU fan with a 4-pin fan power cable.
(Note) Whether the CPU Smart FAN Control function is supported will depend on the CPU you install.
GA-MF3 Motherboard
PC Health Status
OK
OK
OK
OK
36 o C
3245 RPM
0 RPM
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Auto]
+/-/PU/PD: Value F10: Save
F7: Optimized Defaults
C / 140
o
C / 158
o
C / 176
o
C / 194
o
(Note)
- 42 -
Item Help
Menu Level
ESC: Exit F1: General Help
F.
o
F.
o
F.
o
F.
o