Integrated Peripherals - Gigabyte GA-G1975X-C User Manual

2-3

Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
On-Chip Primary PCI IDE
SATA RAID/AHCI Mode
On-Chip SATA Mode
x PATA IDE Set to
SATA Port 0/2 Set to
SATA Port 1/3 Set to
USB Controller
USB 2.0 Controller
USB Keyboard Support
USB Mouse Support
Legacy USB storage detect
Onboard H/W Sound
Onboard H/W 1394
Onboard H/W GigaATA
Onboard H/W LAN
OnBoard LAN Boot ROM
Onboard Serial Port 1
i-Lock
: Move Enter: Select
F3: Language
On-Chip Primary PCI IDE
Enabled
Disabled
SATA RAID / AHCI Mode
RAID
AHCI
Disabled
On-Chip SATA Mode
Disabled
Auto
Combined
Enhanced
Non-Combined
PATA IDE Set to
Ch.1 Master/Slave Set PATA IDE to Ch. 1 Master/Slave.
Ch.0 Master/Slave Set PATA IDE to Ch. 0 Master/Slave.(Default value)
SATA Port 0/2 Set to
This value will be automatically made by the setting "On-Chip SATA Mode" and "PATA IDE Set
to". If PATA IDE were set to Ch. 1 Master/Slave, this function will auto set to Ch. 0 Master/Slave.
SATA Port 1/3 Set to
This value will be automatically made by the setting "On-Chip SATA Mode" and "PATA IDE Set
to". If PATA IDE were set to Ch. 0 Master/Slave, this function will auto set to Ch. 1 Master/Slave.
GA-G1975X-C Motherboard
Integrated Peripherals
[Enabled]
[Disabled]
[Auto]
Ch.0 Master/Slave
Ch.2 Master/Slave
Ch.3 Master/Slave
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[3F8/IRQ4]
[Enabled]
+/-/PU/PD: Value
F5: Previous Values F6: Fail-Safe Defaults
Enable onboard 1st channel IDE port. (Default value)
Disable onboard 1st channel IDE port.
Set the onboard SATA controller to RAID mode.
Set the onboard SATA controller to AHCI mode. Advanced Host Controller
Interface (AHCI) is an interface specification that allows the storage driver to
enable advanced Serial ATA features such as Native Command Queuing
and hot plug. For more details about AHCI, please visit Intel's website.
Set the onboard SATA controller to IDE mode.(Default value)
Disable this function.
BIOS will detect automatically. (Default value)
Set On-Chip SATA mode to Combined, you can use up to 4 HDDs on the
motherboard; 2 for SATA and the other for PATA IDE.
Set On-Chip SATA mode to Enhanced, the motherboard allows up to 6 HDDs
to use.
Set On-Chip SATA mode to Non-Combined, SATA will be simulated to PATA
mode.
- 42 -
Item Help
Menu Level
If a hard disk
controller card is
used, set at Disabled.
[Enabled]
Enable on-chip IDE
Port.
[Disabled]
Disable on-chip IDE
Port.
F10: Save ESC: Exit
F7: Optimized Defaults
F1: General Help