Gigabyte GA-G1975X-C User Manual page 92

2. Connect a decoder to your system through
optical cable or coaxial cable. The picture to
the right is an example of connecting an opti-
cal cable to the optical SPDIF Out jack.
3. In the Speaker Selection tab of Creative
Speaker Settings, select the Digital Output
Only checkbox to activate digital output.
4. Set the decoder options in Start -> Program
-> Creative -> Sound Blaster Live 24-bit ->
Device Control to SPDIF Passthrough.
Please refer to Page 85.
GA-G1975X-C Motherboard - 92 -