Table of Contents
Advertisement
Limit CPUID Max. to 3
Enabled
Limit CPUID Maximum value to 3 when use older OS like NT4.
Disabled
Disable CPUID Limit for windows XP.(Default value)
No-Execute Memory Protect
Enabled
Enable No-Execute Memory Protect function.(Default value)
Disabled
Disable No-Execute Memory Protect function.
CPU Enhanced Halt (C1E)
Enabled
Enable CPU Enhanced Halt (C1E) function.(Default value)
Disabled
Disable CPU Enhanced Halt (C1E) function.
CPU Thermal Monitor 2 (TM2)
Enabled
Enable CPU Thermal Monitor 2 (TM2) function.(Default value)
Disabled
Disable CPU Thermal Monitor 2 (TM2) function.
CPU EIST Function
(Note)
Enabled
Enable CPU EIST function.(Default value)
Disabled
Disable CPU EIST function.
Delay For HDD (Secs)
Set delay HDD time from 0~15(secs).
Init Display First
This feature allows you to select the first initiation of the monitor display from which card when you
install a PCI card and a PCI Express VGA card on the motherboard.
PCI
Set Init Display First to PCI VGA card.
PEG
Set Init Display First to PCI Express VGA card (PCIE_16_1 slot). (Default value)
PEG2
Set Init Display First to PCI Express VGA card (PCIE_16_2 slot).
DRAM Data Integrity Mode
ECC
Enable Memory Error Checking and Correction feature when all installed DIMMs
are 72bits width.
Non-ECC
Set DRAM Data Integrity Mode to Non-ECC. (Default value)
(Note)
(Note)
(Note)
- 41 -
BIOS Setup
Advertisement
Table of Contents
