Pnp/Pci Configurations - Gigabyte GA-G1975X-C User Manual

Power On By Keyboard
Password
Disabled
Keyboard 98
KB Power ON Password
When "Power On by Keyboard" set at Password, you can set the password here.
Enter
AC BACK Function
Soft-Off
Full-On
Memory
2-5

PnP/PCI Configurations

CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
Resources Controlled By
x IRQ Resources
PCI Latency Timer(CLK)
PCI 1 IRQ Assignment
PCI 2 IRQ Assignment
: Move Enter: Select
F3: Language
Resources Controlled By
Auto
Manual
IRQ Resources (IRQ3,4,5,7,9,10,11,12,14,15)
PCI Device
Reserved
PCI Latency Timer (CLK)
Set PCI Latency Timer to 32, 64, 128. (Default value: 32)
Enter from 1 to 5 characters to set the Keyboard Power On Password.
Disabled this function. (Default value)
If your keyboard have "POWER Key" button, you can press the key to power on
the system.
Input password (from 1 to 5 characters) and press Enter to set the Keyboard
Power On password.
When AC-power back to the system, the system will be in "Off" state.
(Default value)
When AC-power back to the system, the system always in "On" state.
When AC-power back to the system, the system will return to the Last state
before AC-power off.
PnP/PCI Configurations
[Auto]
Press Enter
[32]
[Auto]
[Auto]
+/-/PU/PD: Value
F5: Previous Values F6: Fail-Safe Defaults
Assign PnP resource (I/O address, IRQ & DMA channels) for Plug and Play
compatible devices automatically (Default value)
Assign resource manually.
This IRQ assigns for PCI device. (Default value)
Reserved this IRQ for other device.
- 45 -
Menu Level
Device(s) using this
INT:
F10: Save ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help
BIOS Setup