Airport Approach Page - Garmin GNS 530W Pilot's Manual & Reference

Airport Approach Page

The Airport Approach Page shows the available
approach procedures for the selected airport. Where
multiple initial approach fixes (IAFs) and feeder routes
are available, that information may also be displayed.
A map image provides a layout diagram for each
approach and transition.
If a WAAS approach has been selected, the WAAS
approach ID is displayed in the top left corner of the
map. The approach service level is shown in the lower
right corner of the map. Service level annunciations
available are: LPV, L/VNAV, LNAV+V, or LNAV.
WAAS Identifier, Symbol
approach and Type
ID
Map Image Fourth Page in
WPT Group
To scroll through the available approaches and
transitions:
Press the small right knob to activate the
1.
cursor.
2. Turn the large right knob to place the cursor
on the APPROACH procedure name field.
Turn the small right knob to display a window
3.
of available approaches for the selected airport.
Continue turning the small right knob to
select the desired approach.
Approach
Procedure Name
Transitions: IAFs,
Feeder Routes and
Vectors-to-Final
WAAS service level
With the cursor on the
"APPROACH" name field, turn the small right
knob to select the desired procedure and
press ENT.
4. Press ENT.The cursor moves to the transitions
(TRANS) field.
Turn the small right knob to display a window
5.
of available transitions. Continue turning
the small right knob to select the desired
transition or select "VECTORS" for guidance
only along the final course segment of the
approach.
With the cursor on the "TRANS" field, turn
the small right knob to select the desired
transition. Select "VECTORS" for guidance
only along the final course segment of the
approach.
6. Press ENT.To remove the flashing cursor, press
the small right knob.
6 - WPT PAGES
Airport Approaches
123