Airport Departure Page - Garmin GNS 530W Pilot's Manual & Reference

6 - WPT PAGES
Airport Departures
To manually transition to a loaded arrival proce-
dure:
1. From the Active Flight Plan Page, press the
small right knob to activate the cursor and
scroll down through the list of loaded arrival
waypoints.
2. When the desired loaded arrival waypoint is
highlighted, press the direct-to key, then
press ENT to highlight the 'Activate?' prompt
(note that any loaded arrival waypoint may be
selected).
Press ENT again to confirm activation.
3.
128

Airport Departure Page

The Airport Departure Page shows the available
Airport Departure Procedures (DPs; also referred to as
SIDs) for the selected airport. Where multiple runways
or transitions are associated with the departure pro-
cedure, that information may also be displayed. A map
image provides a layout diagram for each departure,
runway and transition.
Identifier, Symbol Map Image
and Type
To scroll through the available departures:
1. Press the small right knob to activate the
cursor.
Turn the large right knob to place the cursor
2.
on the departure (DEP) procedure name field.
With the cursor on the "DEP" field, turn the
small right knob to display a list of available
departure procedures.
Departure
Procedure Name
Runways Associated
with Departure
Transitions
Sixth Page in
WPT Group