Airport Approach Page; Airport Frequency Page Options - Garmin GNS 530 Pilot's Manual & Reference

SECTION 7
WPT PAGES

Airport Frequency Page Options

The following options are available for the Airport
Frequency Page, by pressing the MENU Key:
• Select Next FPL Apt? - This option is only
available when a Flight Plan is active. Allows the
pilot to view the frequency information for the
next airport in the active flight plan
• Select Destination Apt? - This option is only
available when a Flight Plan is active. Allows the
pilot to view the frequency information for the
active flight plan destination airport.
Selecting an Airport Frequency Page Menu
Option:
1) With a Flight Plan Active, select the Airport
Runway Page.
2) Press the MENU Key to display the Airport
Runway Page Menu.
Turn the large right knob to highlight 'Select
3)
Next FPL Apt?' or 'Select Destination Apt?' and
press the ENT Key (Figure 7-18).
Figure 7-18 Airport Runway Page Menu
4) The Airport Frequency Page displays information
regarding the next Flight Plan or Destination
Airport.
7-10

7.5 AIRPORT APPROACH PAGE

The Airport Approach Page (Figure 7-19) shows the
available approach procedures for the selected airport.
Where multiple initial approach fixes (IAFs) and feeder
routes are available, that information may also be
displayed. A map image provides a layout diagram for
each approach and transition.
To view approach information for a particular airport
on the Airport Approach Page, enter the airport' s identifier
per Section 7.1.
Map Im-
age
Figure 7-19 Airport Approach Page
Scrolling through the available approaches
and transitions:
1)
2)
3)
GNS 530(A) Pilot's Guide and Reference
Airport Identifier,
Symbol, and Type
Current Number of Pages in
Page Group Current Page Group
Press the small right knob to activate the
cursor.
Turn the large right knob to place the cursor
on the approach (APR) procedure name field.
Turn the small right knob to display a window
of available approaches for the selected airport
(Figure 7-20). Continue turning the small right
knob to select the desired approach.
Approach
Procedure
Name
Transitions:
IAF's, Feeder
Routes, and
Vectors-to-Final
Position of
Current Page
within Current
Page Group
190-00181-00 Rev. H