Change Fields - Garmin GNS 530W Pilot's Manual & Reference

5. Turn the small right knob to select the desired
Offset Direction and press ENT.
Activate? is highlighted. Press ENT to activate
6.
the selected Parallel Track. Or, press CLR or the
small right knob (CRSR) to cancel Parallel
Track selection.
After activating Parallel Track, the flight plan
will show "-P" for each leg to indicate
Parallel Track is active and GPS-PTK will be
annunciated in the lower left corner.
Original
waypoint
Original
flight plan
course line
After setting a parallel track to your current
flight plan, a magenta parallel track line will
be drawn offset from the original by the se-
lected distance. The original course line will
be drawn in white. The aircraft will navigate
to the parallel track course line.
To cancel a parallel track to your flight plan.
1.
2.
3.

Change Fields

Change Fields? allows you to select the desired
data items to display on the active flight plan page.
1.
Parallel Track
2.
offset waypoint
Present
Position
3.
4 - FLIGHT PLANS
Active Flight Plan Editing
With the Active Flight Plan Page displayed,
press MENU to display the Active Flight Plan
Page Options window.
Turn the large right knob to highlight "Parallel
Track?" and press ENT.
"Cancel?" is highlighted. Press ENT.
With the Active Flight Plan Page displayed,
press MENU to display the Active Flight Plan
Page Options window.
Turn the large right knob to highlight
"Change Fields?" and press ENT. The field
active for selection will flash. Turn the large
right knob to highlight the field to change.
Changing fields for the active flight
plan.
Turn the small right knob to open the list of
selections and continue turning it to highlight
the desired selection and then press ENT.
Restore Defaults
77