Date / Time - Garmin GNS 530W Pilot's Manual & Reference

To change the position format:
1. Select "Units / Position" from the Setup
Page.
Turn the large right knob to highlight the
2.
"Position Format" field.
3. Turn the small right knob to select the desired
position format.The following position formats
are available:
• hdd°mm.mmm — latitude and longitude in
degrees and decimal minutes
• hdd°mm'ss.s" — latitude and longitude in
degrees, minutes and decimal seconds
• MGRS — Military Grid Reference System
• UTM/UPS — Universal Transverse Mercator /
Universal Polar Stereographic grids
4. Press ENT to accept the selected format.
Map Datum:
The Map Datum may not be changed.
NOTE: Per TSO C146a, the WGS-84 map datum is used.

Date / Time

To display local time or UTC:
1. Select "Date / Time" from the Setup Page.
2. The flashing cursor highlights the "Time
Format" field. Turn the small right knob to
display a window of available time formats:
Local 12hr, Local 24hr, or UTC.
3. Continue turning the small right knob to
select the desired time format.
Press ENT to accept the selection.
4.
To set the local time:
1. Select "Date / Time" from the Setup Page.
2. Turn the large right knob to highlight the
time offset field.
Usethesmallandlarge right knobstoenterthe
3.
desiredoffset,beginningbyenteringaminus(-)or
plus (+) sign to indicate whether the offset is
behind UTC or ahead of UTC. (In the United
States, all local time offsets are minus, or
behind UTC.)
9 - AUX PAGES
Setup 1 Page
181