Saving And Reloading Configurations - Furuno Felcom 30 Operator's Manual

5. CONFIGURATION FROM PC
5.14

Saving and reloading configurations

The FELCOM 30 configuration settings may be stored on the PC hard disk, e.g.
prior to replacing software.
Procedure
1 Open the Device Manager window as indicated.
2 Clicking Devices > Save config to a file automatically stores the data in a
"Config. cgf" file in the vtLite directory c:/program files/vtLite Mobile.
3 After installing the software, the settings may be transferred back to
FELCOM 30 by pressing Load.
4 Clicking Restore Factory Defaults loads default FELCOM 30 configurations.
Printout/storing a configuration summary:
5 Clicking Print Summary opens the Printout Viewer (see next page) which
lists the settings of the end user equipment, and allows filing and/or printout.
Note: Save config to a file only saves the Device Manager settings. Setting
such as Net provider / Access codes / ISDN protocol are not saved.
Phone book data and traffic log must be saved in the Book and Log
menus.
5-34
21
22
23