Set Diagnostics - Furuno Felcom 30 Operator's Manual

5.9.3

Set diagnostics

Additional system information is displayed when diagnostics is turned On.
See also "5.1 Menu functions".
1 Double-click the Set diagnostics icon via the Function menu > Advanced
functions menu > Configuration menu.
2 Click On or Off as required.
When choosing On, the following terms appear.
Alarm and message icon (menu 9)
Transceiver status icon (menu 9-3)
EIRP table icon (menu 9-4)
Power supply unit temperature
Calculated spot beam
Antenna elevation
When pointing at the time indication, a popup window shows the year and date.
1
Exit Menu 1. Set default
Net provider
Mail
2
Calculated spot beam
5. CONFIGURATION FROM PC
2. Set access 4. Phone 9. Advanced
level setup menu functions
Exit Menu 1. Access
3. Software 4. Alarms
control
updata prep. and messages
Exit Menu 1. ISDN 2. Net service 4. Set
Exit Menu
configuration providers diagnostics
9. Spot Beam
Report Method
Antenna elevation
Power supply temparature
7.
Configuration
6. USB
5-19