Furuno Felcom 30 Operator's Manual page 188

7. TROUBLESHOOTING
12B1/72
12B1/73
12B1/74
12B1/75
12B1/76
12B1/77
12B1/78
12B1/79
12B1/80
12B1/81
12B1/82
12B1/83
12B1/84
12B1/85
12B1/86
12B1/87
12B1/88
12B1/89
12B1/90
12B1/91
12B1/92
12B1/93
12B1/94
12B1/95
12B1/96
12B1/97
12B1/98
12B1/99
12B1/100
12B1/101
12B1/102
12B1/103
12B1/105
12B1/106
12B1/107
12B1/108
12B1/114
7-12
Congestion, can't connect lines, internal dialing.
Congestion, can't get line, internal dialing.
Internal number unallocated
Incompatible destination for internal call
Invalid CallRef, (Too late, another call process got the call)
Too late, another call process got the call, (ISDN:
non_selected_user_clearing)
Local interface too busy to handle the call
Used by LOADING, transfer_blocked
Local number analysis failed, dialled_number_rejected
Doppler Compensation error: Too large speed or too large error
Internal interface timer expired (e.g. ISDN protocols)
Internal retrieve error
Internal retrieve blocking, can't allocate or connect channels
Internal rearrangement error, probably race condition
Internal IPDS(MPDS) protocol error, int_ipds_protocol_error
Manual control of the system (test and type approval)
Internal decession to clear or abort activity due to unexpected SW
sequence
The communication link to RFB has failed, rfb_comm_failed
The RFB failed to tune the digital attenuator, rfb_attenuator_failed
The IPDS(MPDS) service is not allowed due to local terminal
configuration, restore to factory defaults
No originator id is defined for IPDS(MPDS), local configuration is
incorrect, restore to factory defaults
No response was received from the IPDS(MPDS) host system
within the allowed time
The device connected to the terminal (PC) cleared the call
The bulletin board information required for IPDS(MPDS) is
unavailable
The IPDS(MPDS) call was disallowed or preemptied by another
activity local to the MES
The terminal received a request to de register from the
IPDS(MPDS) host
Synch to the LESP was lost during a call, ipds_sync_lost, verify
correct user name/password
Unable to tune to one of the IPDS(MPDS) channels
Modem unit hardware does not support IPDS(MPDS) service,
RFB hardware does not support IPDS(MPDS) service,
The attempt to register with IPDS(MPDS) was rejected
The attempt to establish a IPDS(MPDS) connection was rejected
Timeout is attempt to setup a IPDS(MPDS) connection
Attempt to establish a IPDS(MPDS)connection was rejected
The MES failed to handle the IPDS(MPDS) data within the allowed
time, ipds_too_slow
Internal error within the IPDS(MPDS) software
The call was preempted by a call waiting