7.2.2 Alarms - Furuno Felcom 30 Operator's Manual

7. TROUBLESHOOTING

7.2.2 Alarms

Alarms and messages menu
1 Double-click Active alarms and warnings to open List of active alarms
window.
2 The List of active alarms displays the alarms and warnings that are not yet
read.
An alarm will remain active until the problem has been solved.
Typical alarm conditions are listed in ALARMLIST on page 7-8.
Pressing right-arrow displays detailed information and moves the alarm to the
Information Log.
3 The Information log lists previous alarm conditions, warnings and event
information.
4 Double-click Clear cause log to open List of clear causes window.
The list of CLEAR CAUSES later in this manual indicates the possible
reason for the event. Refer to page 7-8.
7-6
Missing output
Burst not sent