Configuring Smartports Macros; Default Smartports Macro Configuration - Cisco WS-C3750-48PS-S Software Configuration Manual

Configuring Smartports Macros

Table 12-1 Cisco-Default Smartports Macros (continued)
Macro Name
cisco-phone
cisco-switch
cisco-router
1. Cisco-default Smartports macros vary depending on the software version running on your switch.
Cisco also provides a collection of pretested, Cisco-recommended baseline configuration templates for
Catalyst switches. The online reference guide templates provide the CLI commands that you can use to
create Smartports macros based on the usage of the port. You can use the configuration templates to
create Smartports macros to build and deploy Cisco-recommended network designs and configurations.
For more information about Cisco-recommended configuration templates, refer to this Smartports
website:
http://www.cisco.com/go/smartports
Configuring Smartports Macros
You can create a new Smartports macro or use an existing macro as a template to create a new macro
that is specific to your application. After you create the macro, you can apply it globally to a switch or
to a switch interface or range of interfaces.
This section includes information about:
•
•
•
•
•

Default Smartports Macro Configuration

There are no Smartports macros enabled.
Catalyst 3750 Switch Software Configuration Guide
12-2
1
Description
Use this interface configuration macro when connecting a desktop device such as a
PC with a Cisco IP Phone to a switch port. This macro is an extension of the
cisco-desktop macro and provides the same security and resiliency features, but with
the addition of dedicated voice VLANs to ensure proper treatment of delay-sensitive
voice traffic.
Use this interface configuration macro when connecting an access switch and a
distribution switch or between access switches connected using GigaStack modules
or GBICs.
Use this interface configuration macro when connecting the switch and a WAN
router.
Default Smartports Macro Configuration, page 12-2
Smartports Macro Configuration Guidelines, page 12-3
Creating Smartports Macros, page 12-4
Applying Smartports Macros, page 12-5
Applying Cisco-Default Smartports Macros, page 12-6
Chapter 12 Configuring Smartports Macros
78-16180-02