Displaying CMS
Front Panel View
When CMS is launched from a command switch, you can display the Front Panel view by clicking the
Front Panel button on the tool bar, as shown in
Figure 3-6
1
When CMS is launched from a noncommand switch, the CMS Front Panel view displays by default, and
the front-panel image displays only the front panel of that switch.
The Front Panel view displays the front-panel image of the command switch and any other switches that
were selected the last time the view was displayed.
the Front Panel view. You can drag the switches that appear and re-arrange them. You can right-click on
a switch port to configure that port.
Figure 3-7
1
1
2
Catalyst 3750 Switch Software Configuration Guide
3-14
Toolbar
Front Panel view button
Front Panel View and Port Popup Menu
2
3
Cluster tree
3
Command switch
4
Figure
3-6.
1 2
2
Topology view button
4
Check boxes to show switches
Port settings popup menu
Chapter 3
Getting Started with CMS
78-16180-02