Configuring Mstp Features - Cisco WS-C3750-48PS-S Software Configuration Manual

Network switch
Table of Contents

Advertisement

Configuring MSTP Features

Configuring MSTP Features
These sections describe how to configure basic MSTP features:
Catalyst 3750 Switch Software Configuration Guide
18-12
Propagation-When an RSTP switch receives a TC message from another switch through a
designated or root port, it propagates the change to all of its nonedge, designated ports and to the
root port (excluding the port on which it is received). The switch starts the TC-while timer for all
such ports and flushes the information learned on them.
Protocol migration-For backward compatibility with 802.1D switches, RSTP selectively sends
802.1D configuration BPDUs and TCN BPDUs on a per-port basis.
When a port is initialized, the migrate-delay timer is started (specifies the minimum time during
which RSTP BPDUs are sent), and RSTP BPDUs are sent. While this timer is active, the switch
processes all BPDUs received on that port and ignores the protocol type.
If the switch receives an 802.1D BPDU after the port's migration-delay timer has expired, it assumes
that it is connected to an 802.1D switch and starts using only 802.1D BPDUs. However, if the RSTP
switch is using 802.1D BPDUs on a port and receives an RSTP BPDU after the timer has expired,
it restarts the timer and starts using RSTP BPDUs on that port.
Configuring Path Cost, page 18-19
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
Chapter 18
Configuring MSTP
(required)
(optional)
78-16180-02

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3750

Table of Contents