Cisco WS-C3750-48PS-S Software Configuration Manual page 692

Displaying Standard QoS Information
Table 32-15 Commands for Displaying Standard QoS Information (continued)
Command
show mls qos queue-set [qset-id]
show policy-map [policy-map-name [class
class-map-name]]
Catalyst 3750 Switch Software Configuration Guide
32-68
Purpose
Display QoS settings for the egress queues.
Display QoS policy maps, which define classification criteria for
incoming traffic.
Do not use the show policy-map interface privileged
Note
EXEC command to display classification information
for incoming traffic. The interface keyword is not
supported, and the statistics shown in the display should
be ignored.
Chapter 32 Configuring QoS
78-16180-02