Managing The System Time And Date - Cisco WS-C3750-48PS-S Software Configuration Manual

Administering the Switch
This chapter describes how to perform one-time operations to administer the Catalyst 3750 switch.
Unless otherwise noted, the term switch refers to a standalone switch and to a switch stack.
This chapter consists of these sections:
•
•
•
•
•

Managing the System Time and Date

You can manage the system time and date on your switch using automatic configuration, such as the
Network Time Protocol (NTP), or manual configuration methods.
For complete syntax and usage information for the commands used in this section, refer to the Cisco IOS
Note
Configuration Fundamentals Command Reference, Release 12.2.
This section contains this configuration information:
•
•
•
•
78-16180-02
Managing the System Time and Date, page 7-1
Configuring a System Name and Prompt, page 7-14
Creating a Banner, page 7-18
Managing the MAC Address Table, page 7-20
Managing the ARP Table, page 7-28
Understanding the System Clock, page 7-2
Understanding Network Time Protocol, page 7-2
Configuring NTP, page 7-4
Configuring Time and Date Manually, page 7-11
C H A P T E R
Catalyst 3750 Switch Software Configuration Guide
7
7-1