Auto-Qos Configuration Example - Cisco WS-C3750-48PS-S Software Configuration Manual

Configuring Auto-QoS

Auto-QoS Configuration Example

This section describes how you could implement auto-QoS in a network, as shown in
optimum QoS performance, auto-QoS should be enabled on all the devices in the network.
Figure 32-10 Auto-QoS Configuration Example Network
Figure 32-10
enabled on the switches in the wiring closets at the edge of the QoS domain.
Catalyst 3750 Switch Software Configuration Guide
32-26
End stations
Identify this interface
as connected to a
trusted switch or router
IP
Identify these
interfaces as
connected to
IP
IP phones
Cisco IP phones
shows a network in which the VoIP traffic is prioritized over all other traffic. Auto-QoS is
Cisco router
To Internet
Trunk Trunk
link link
Identify these
interfaces as
connected to
IP phones
Chapter 32 Configuring QoS
Figure
Video server
172.20.10.16
Identify this interface
as connected to a
trusted switch or router
IP
IP
Cisco IP phones
32-10. For
78-16180-02