Cisco WS-C3750-48PS-S Software Configuration Manual page 78

Understanding CMS
The feature bar shows the features available for the devices in your cluster. By default, the feature
•
bar is in standard mode. In this mode, the feature bar is always visible, and you can reduce or
increase the width of the feature bar. In autohide mode, the feature bar appears only when you move
the cursor to the left edge of the CMS workspace.
–
–
Figure 3-2
Figure 3-2
1 Features tab
Only features supported by the devices in your cluster are displayed in the feature bar.
Note
You can search for features that are available for your cluster by clicking Search and entering a feature
name, as shown in
Access modes affect the availability of features from CMS. Some CMS features are not available in
read-only mode. For more information about how access modes affect CMS, see the
section on page
Catalyst 3750 Switch Software Configuration Guide
3-4
To enable the feature bar, click CMS > Feature Bar, and select Standard Mode.
To hide the feature bar, click CMS > Feature Bar, and select Autohide Mode.
shows the features available in a sample cluster.
Features Tab and Search Tab
2 Search tab
Figure 3-2.
3-7.
Chapter 3 Getting Started with CMS
"Privilege Levels"
78-16180-02