Monitoring And Maintaining Eigrp - Cisco WS-C3750-48PS-S Software Configuration Manual

Chapter 34 Configuring IP Unicast Routing
Command
Step 9 accept-lifetime start-time {infinite | end-time | duration
seconds}
Step 10 send-lifetime start-time {infinite | end-time | duration
seconds}
Step 11
end
Step 12 show key chain
Step 13 copy running-config startup-config
Use the no forms of these commands to disable the feature or to return the setting to the default value.

Monitoring and Maintaining EIGRP

You can delete neighbors from the neighbor table. You can also display various EIGRP routing statistics.
Table 34-8
explanations of fields in the resulting display, refer to the Cisco IOS IP Command Reference, Volume 2
of 3: Routing Protocols, Release 12.2.
Table 34-8 IP EIGRP Clear and Show Commands
Command
clear ip eigrp neighbors [if-address | interface]
show ip eigrp interface [interface] [as number]
show ip eigrp neighbors [type-number]
show ip eigrp topology [autonomous-system-number] |
[[ip-address] mask]]
show ip eigrp traffic [autonomous-system-number]
78-16180-02
lists the privileged EXEC commands for deleting neighbors and displaying statistics. For
Purpose
Delete neighbors from the neighbor table.
Display information about interfaces configured for EIGRP.
Display EIGRP discovered neighbors.
Display the EIGRP topology table for a given process.
Display the number of packets sent and received for all or a
specified EIGRP process.
Purpose
(Optional) Specify the time period during which the key
can be received.
The start-time and end-time syntax can be either
hh:mm:ss Month date year or hh:mm:ss date Month
year. The default is forever with the default start-time
and the earliest acceptable date as January 1, 1993. The
default end-time and duration is infinite.
(Optional) Specify the time period during which the key
can be sent.
The start-time and end-time syntax can be either
hh:mm:ss Month date year or hh:mm:ss date Month
year. The default is forever with the default start-time
and the earliest acceptable date as January 1, 1993. The
default end-time and duration is infinite.
Return to privileged EXEC mode.
Display authentication key information.
(Optional) Save your entries in the configuration file.
Catalyst 3750 Switch Software Configuration Guide
Configuring EIGRP
34-39