Cisco SR520-FE-K9 Administration Manual page 86

Configuring the Network
CDP Setting
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)
CDP Settings
Field
CDP
CDP Timer
CDP Hold Timer
Interface List
Description
Control whether CDP will run on some, all or none of the
SRP Ethernet interfaces
setting (recommended).
Specify the interval at which successive CDP packets
can be sent. You can enter a value between 5 to 900
seconds. The default is 60 seconds.
Control whether CDP will run on some, all or none of the
SRP Ethernet interfaces
255 seconds. The default value is 80 seconds.
Check the enable box to select which interfaces will run
CDP.
.
CDP per port is the default
.
Enter a value between 10 to
5
86