Cisco SR520-FE-K9 Administration Manual page 59

Setting up the Interfaces of the Services Ready Platforms
Setting up the Wireless LAN
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)
Advanced Wireless Settings
Field
Global Settings
AP Isolation
Basic Rate
N Transmission Rate
Transmission Rate
Description
Isolates all wireless clients and wireless devices from
one another. Wireless devices will be able to
communicate with the SRP but not with other wireless
devices on the network. To use this function, select
Enabled. AP Isolation is disabled by default.
Series of rates at which the SRP can transmit. The SRP
advertises its Basic Rate to the other wireless devices in
your network, so they know which rates will be used
and automatically selects the best rate for transmission.
The default setting is Default, which allows the SRP to
transmit at all standard wireless rates (1-2Mbps,
5.5Mbps, 11Mbps, 18Mbps, and 24Mbps). Other
options are 1-2Mbps, for use with older wireless
technology, and All, which allows the SRP to transmit at
all wireless rates. The Basic Rate is not the actual rate of
data transmission. If you want to specify the SRP's rate
of data transmission, configure the Transmission Rate
setting.
Set the data transmission rate depending on the speed
of your Wireless-N networking. Select from a range of
transmission speeds, or select Auto for the SRP to
automatically use the fastest possible data rate and
enable the Auto-Fallback feature. Auto-Fallback
negotiates the best possible connection speed
between the SRP and a wireless client. The default is
Auto.
Set the data transmission rate depending on the speed
of your wireless network. Select from a range of
transmission speeds, or select Auto for the SRP to
automatically use the fastest possible data rate and
enable the Auto-Fallback feature. Auto-Fallback
negotiates the best possible connection speed
between the SRP and a wireless client. The default is
Auto.
4
59