Cisco SR520-FE-K9 Administration Manual page 46

Setting up the Interfaces of the Services Ready Platforms
Setting up the VLAN Interfaces and LAN Ports
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)
VLAN Settings
Field
VLAN Name
VLAN ID
Voice VLAN
Address Type
Available Interface
Added Interface
Description
Bridge or VLAN name.
Bridge or VLAN ID.
Click this box if you want to use voice. Only use this
option in VLAN mode.
Address type determines the way in which the VLAN IP
interface is configured.
•
Choose None if an IP interface is not required. This would
typically be the case when bridging ports only.
•
Choose Static IP Address to manually define an address
for the interface.
•
Choose Dynamic IP Address to request an address from
a DHCP server on the local network.
•
Choose DHCP server to enable a previously configured
DHCP Server service on this interface. In this case, the
VLAN IP address will be derived from the DHCP Server
configuration.
Interfaces available to be added to the VLAN. To move
an interface to the Added Interface list, click the
interface, and then click the right-arrow button (>). To
move all of the interfaces at once, click the double
right-arrow button (>>).
Interfaces that were selected as members of the VLAN
bridge. To remove an interface from this list, click the
interface and then click the left arrow button (<). To
remove all of the interfaces at once, click the double
left-arrow button (<<).
4
46