Cisco SR520-FE-K9 Administration Manual page 50

Setting up the Interfaces of the Services Ready Platforms
Setting up the Wireless LAN
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)
Basic Wireless Settings
Field Description
Network Mode
Choose the wireless mode based on the type of devices in
your network.
NOTE
network security. You must select an active network mode to enable
it before configuring further.
•
•
•
•
•
•
Radio Band Select the wireless bandwidth for your network. There are
three options: Auto, Standard–20MHz Channel, and Wide-
40MHz Channel. The default is Standard–20MHz Channel.
Wide channel band configuration is available for Wireless-N
networks and clients only. If wide channel mode is selected
for mixed networks, standard channel usage is still available
for Wireless -B and -G clients.
Wide Channel If you selected Wide-40MHz Channel for the Radio Band
setting, then this setting will be available for your primary
Wireless-N channel. Select any channel from the drop-down
list. If radio band is selected automatically, the wide channel
is also chosen automatically.
The wireless access point is disabled by default to ensure
If you have Wireless-N, Wireless-G, and Wireless-B devices in
your network, select Mixed.
If you have only Wireless-G and Wireless-B devices in your
network, select BG-Mixed.
If you have only Wireless-N devices, select Wireless-N Only.
If you have only Wireless-G devices, select Wireless-G Only.
If you have only Wireless-B devices, select Wireless-B Only.
If you don't want to use the integrated wireless access
point,
select Disabled.
4
50