Cisco SR520-FE-K9 Administration Manual page 30

Setting up the Interfaces of the Services Ready Platforms
Setting up the WAN Interface
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)
Ethernet WAN Interface Settings
Field
WAN
VLAN ID
Connection Type
Description
WAN1 is the interface identity for the SRP's WAN port. This
value cannot be changed.
VLAN identity for the interface or subinterface. This value
cannot be changed after the interface is first created.
Type of Internet connection that your ISP provides.
Automatic Configuration/DCHP
Connection type often used with cable modems. Choose
this option if your ISP dynamically assigns an IP address on
connection. No other information is required for this
connection type.
Static IP
Choose this option if your ISP provides you with a static
(permanent) IP address and does not assign it dynamically.
Enter the assigned IP Address, Subnet Mask, and Default
Gateway IP address.
4
30