Table of Contents
Advertisement
•
For systems with Cisco IOS Release 11.2(8)GS or later, refer to the following modular
configuration and modular command reference publications, as appropriate for your
configuration:
— Configuration Fundamentals Configuration Guide
— Configuration Fundamentals Command Reference
— Wide-Area Networking Configuration Guide
— Wide-Area Networking Command Reference
— Network Protocols Configuration Guide, Parts 1, 2, and 3
— Network Protocols Command Reference, Parts 1, 2, and 3
— Configuration Builder Getting Started Guide
— Troubleshooting Internetworking Systems
— Debug Command Reference
— System Error Messages
— Cisco IOS Software Command Summary
— Cisco Management Information Base (MIB) User Quick Reference
•
For additional line card interface configuration information, refer to the following:
— The configuration note Quad OC-3c/STM-1c Packet-Over-SONET Line Card
Installation and Configuration (Document Number 78-4333-xx) your Quad
OC-3c/STM-c1 POS line card
— The configuration note OC-12c/STM-4c Packet-Over-SONET Line Card
Installation and Configuration (Document Number 78-4341-xx) that accompanied
your OC-12c/STM-4c POS line card
— The configuration note OC-12c/STM-4c Asynchronous Transfer Mode Line Card
Installation and Configuration (Document Number 78-4344-xx) that accompanied
your OC-12c/STM-4c ATM line card
•
For additional GRP information, refer to the configuration note Gigabit Route
Processor (GRP) Installation and Configuration (Document Number 78-4339-xx) that
accompanied your GRP.
Observing System Startup and Performing a Basic Configuration 4-51
If You Need More Configuration Information
Advertisement
Table of Contents
Troubleshooting
