Chapter 4 Observing System Startup And Performing A Basic Configuration - Cisco GSR12/60 - 12012 Router -AnyLAN, SONET/SDH Installation And Configuration Manual

Observing System Startup
and Performing a Basic
Configuration
This chapter describes the initial system startup process, and provides the procedures for
performing a basic configuration of your Cisco 12012 Gigabit Switch Router (GSR).
This chapter contains the following sections:
•
Starting the System and Observing Initial Conditions
•
Configuring the Cisco 12012
•
Implementing Other Configuration Tasks
•
What To Do Next?
•
If You Need More Configuration Information
Note The primary goal of this chapter is to provide you with the necessary information to
configure your system so that you can access your network or access your Cisco 12012
remotely via Telnet.
Complex configuration procedures are beyond the scope of this text, and can be found in
the configuration publications listed in the section "If You Need More Configuration
Information." Also refer to the configuration notes that accompanied the line cards installed
in your system.
Observing System Startup and Performing a Basic Configuration 4-1
C H A P T E R 4