Figure 3-26 Connecting Source Ac To The Ac-Input Power Supply - Cisco GSR12/60 - 12012 Router -AnyLAN, SONET/SDH Installation And Configuration Manual

Step 4 Tighten the captive screw on the power supply faceplate. (See Figure 3-26a.)
Figure 3-26 Connecting Source AC to the AC-Input Power Supply
d Connect
power cord
Locate the AC power cord and remove it from its shipping packaging. Verify that
Step 5
the AC power cord shipped with the power supply is the correct type for your
site.
Note If you have received the wrong type of power cord, contact your service
representative for a replacement.
b
Connect
power cord
AC
OK
OUTPUT
FAIL
a
Tighten
captive
screw
Connecting Power
INPUT:
~
200 - 240V
10 A
c
Attach
50/60 HZ
2000 W
spring clip
Installing a Cisco 12012 3-55