Table of Contents
Advertisement
3.2 Accessing to the Camera
Whenever you want to access the camera:
1. Since the default configuration of the camera is DHCP mode enabled,
you are recommended to launch IP Setup to search the IP address that
is assigned to the camera by the DHCP server, and then click Link to
access the camera via the Web browser.
2. If Network Camera can't get IP Address under DHCP mode, the default
IP Address will be 192.168.10.30.
3. When the login window appears, enter the default User name (admin)
and password (admin) and press OK to access to the main screen of
the camera's Web Configuration.
NOTE If you are initially access to the camera, you will be ask to install a
new plug‐in for the camera. Permission request depends on the
Internet security settings of your computer. Click Yes to proceed.
Enter the User name
and Password.
- 14 -
Advertisement
Table of Contents
