Using the Camera Web Manager
The camera is easy to use and manage. Use a normal web browser to access the camera's live video display,
as well as the configuration software. It is recommended to check and make sure the computer can access
and use the camera before placing it in the location where it will be used, especially if it is mounted to a
ceiling or other area that is difficult to physically access.
For the initial setup, use the SetupWizard program located on the TV‐IP602WN CD‐ROM included with the
camera. Use the IPCam Wizard to assign an IP address and other network settings. Once the camera has an
IP address, follow the instructions below to access the camera's web management interface used to
manage the camera and for video display.
NOTE: If using
functions working properly, make sure VLC Mozilla plugin and Java JRE are both installed
in your computer.
Accessing the Camera Video Display
If the camera is used on a network with an active DHCP server, the camera will detect it and obtain an IP
address. If you are using the camera on a network with a DHCP server it is necessary to first determine
what the IP address of camera is. To do this, follow the instructions in the Quick Installation Guide to launch
the IPCam Wizard software utility used with the TV‐IP602WN.
NOTE: If your network uses DHCP or has an active DHCP server running, use the SetupWizard utility on
the installation CD‐ROM shipped with the camera to first access the camera. Once it is accessed, you can
change the IP address or continue to use the DHCP assigned address as preferred. See the Quick
Installation Guide for instructions on using the SetupWizard utility.
If your network does not use a DHCP server, the camera will use a default IP address of 192.168.10.30. Use
this address to access the web‐based management software. Use a web browser and type in http://
followed by the default IP address, 192.168.10.30 in the address bar of the browser and press the Enter
key. The URL in the address bar should read: http://192.168.10.30
If the login dialog does not appear, check the proxy server settings on your browser.
NOTE: The wrong proxy server settings on your browser can prevent connection to the web manager. If
you are having trouble connecting to the web interface of the VLAN Switch, configure the proxy settings
to bypass the proxy server or disable use of proxy servers and try to connect again.
TV‐IP602WN ProView Wireless N Pan/Tilt Internet Camera
Mozilla Firefox to view the camera web manager, in order to have all
31
4