2.2 Connecting the Camera to LAN/WLAN
Use the provided Ethernet cable to
connect the camera to your local area
network (LAN).
When you connect the AC power
adapter, the camera is powered on
automatically. You can verify the
power status from the Power LED on
the front panel of the camera.
Once connected, the Link LED starts
flashing green light and the camera is
on standby and ready for use now.
If you use a wireless network in your
application environment, you need to
attach the included external antenna
to the camera.
When the camera is powered on, the
camera will automatically search any
access point with "default" SSID.
NOTE If the camera cannot to your wireless network, you need to install
the camera in LAN and proceed with WLAN settings.
Connecting the Ethernet Cable
Connecting the External Antenna
- 11 -