Table of Contents
Advertisement
Event Configuration >> Schedule Trigger
You can separately configure the schedule for trigger function of the
camera by Email, FTP, or Network Storage. Select the Enable option on
each item, and then select a Schedule Profile from the pull‐down list and
set the Interval time.
NOTE If the setting value of the Network Storage Recording Time Per
Event option in General Setting is longer than the Interval time in
Network Storage Schedule, the recorded file will be a continuous
video clip.
For example, if you set the Network Storage Recording Time Per
Event as 10 seconds and the Interval as 5 seconds, recorded file
becomes a non‐stop video clip because the camera will record a
10‐second video clip every 5 seconds.
- 45 -
Advertisement
Table of Contents
