Connecting The Camera To Lan/Wlan - TRENDnet TV-IP121W User Manual

2.2 Connecting the Camera to LAN/WLAN

Use the provided Ethernet
cable to connect the camera
to your local area network
(LAN).
When you connect the AC
power adapter, the camera is
powered on automatically.
You can verify the power
status from the Power LED on
the front panel of the camera.
Once connected, the Link
LED starts flashing green
light and the camera is on
standby and ready for use
now.
If you use a wireless network
in your application
environment, you need to
attach the included external
antenna to the camera.
When the camera is powered
on, the camera will
automatically search any
access point with "default"
SSID.
NOTE If the camera cannot to your wireless network, you need to
install the camera in LAN and proceed with WLAN settings.
- 11 -