Rack Mounting - TRENDnet TPE-224WS User Manual

Install the Switch on a sturdy, level surface that can support its weight,
or in an EIA standard-size equipment rack. For information on rack
installation, see the next section, Rack Mounting.
When installing the Switch on a level surface, attach the rubber feet to
the bottom of each device. The rubber feet cushion the Switch and
protect the Switch case from scratching.
Figure 1. Attach the rubber feet to the bottom

Rack Mounting

The Switch can be mounted in an EIA standard-size, 19-inch rack,
which can be placed in a wiring closet with other equipment. Attach
the mounting brackets to the Switch's front panel (one on each side),
and secure them with the provided screws.
Figure 2. Attach the mounting bracket to the Switch with the provided screws.
9