Install the Switch on a sturdy, leveled surface that can support its
weight, or in an EIA standard-size equipment rack. For information
on rack installation, see the next section, Rack Mounting.
When installing the Switch on a level surface, attach the rubber feet
on the corners at the bottom of the Switch. The rubber feet cushion the
Switch and protect the Switch case from scratching.
Rack Mounting
The Switch can be mounted in an EIA standard-size, 19-inch rack,
which can be placed in a wiring closet with other equipment. Attach
the mounting brackets at the Switch's front panel (one on each side),
and secure them with the provided screws.
Then, use screws provided with the equipment rack to mount the
Switch on the rack.
7