TRENDnet TPE-224WS User Manual page 19

These ports support network speeds of either 10Mbps or 100Mbps,
and can operate in half- and full- duplex transfer modes. These ports
also support auto-MDIX. Users can use either standard or crossover
Ethernet cables.
1000BASE-T Gigabit Ethernet Ports (Port 25~28):
The Switch's four Gigabit twisted pair ports support auto negotiation and auto
MDIX. These ports operate in half-duplex mode for 10/100Mbps and full-
duplex mode for 10/100/1000Mbps.
Note: When the port is set to "Forced Mode", the Auto MDIX will be
disabled.
Mini-GBIC slots (Port 25~26)
The Switch is equipped with two mini-GBIC slots, supporting
optional 1000BASE-SX/LX mini-GBIC modules.
The 1000BASE-T port 25 and 26 are shared with the mini-GBIC port
25 and 26. When a module is plugged into the mini-GBIC module,
the device will activate the mini-GBIC, and the RJ45 port will be
disabled.
Reset:
The Reset button reset settings back to factory default.
Note: Please make sure you copy down or save settings before
pressing "Reset" button.
13