Power And System Leds; 100Base-Tx Port 1~24 Status Leds - TRENDnet TPE-224WS User Manual

Power and System LEDs

PWR: Power Indicator
On : When the Power LED is lit, the Switch is receiving power.
When the Power LED is off, the power cord is not connected or is
Off :
improperly connected.
SYS: Management Indicator
Blinking : When the CPU is working, the System LED is blinking.
On/Off : The CPU is not working.
FAN: System FAN Status Indicator
OK : When the OK LED is lit, the system fan is working normally.
Fail : When the Fail LED is lit, the system fan has failed. Please shutdown
the Switch immediately and contact your local dealer for repair.
PWR MAX: PoE System Power Status
On : When the system power resource remain <=15.4W (the system power
consumption >= 155W), the LED will be lit. The system will not
provide power to the additional POE PD inserted.
Off : When the system has enough power (the system power consumption
<155W).

100BASE-TX Port 1~24 Status LEDs

Link/ACT: Link/Activity
On : When the Link/ACT LED is lit, the port is successfully connected to an
Ethernet network.
Blinking : When the Link/ACT LED is blinking, the port is transmitting or
receiving data on the Ethernet network.
Off : No link.
100Mbps
On : When the 100Mbps LED is lit, the port is connected to a 100Mbps Fast
Ethernet network.
Off : When the 100Mbps LED is off, the port is connected to a 10Mbps
Ethernet network
15