Table of Contents
Advertisement
Reboot Page
Click on the "Reboot" button to reboot TEW-212APBO device via web
management. All functions will be stopped while the device is rebooted.
Reset page
To reset the TEW-212APBO device to the factory setting, click on the
"Reset" button. A waiting & redirection message should be shown as below
(for the redirection service, please refer to the redirection service section for
detail):
Note: All customized TEW-212APBO configuration settings will be reset
to the default values. Write down any configuration changes to be preserved,
and set up them, when TEW-212APBO starts after reset. Initial TEW-
212APBO setup is described in the "Starting Up" chapter of this manual.
48
Advertisement
Table of Contents
