Table of Contents
Advertisement
Upgrade page
Important! Do not enter this page if there is no need to upgrade TEW-
212APBO. Simply click on the "Reset" button, if no upgrade is necessary.
Entering this page will put the device into UPGRADE mode. All of the
device functions will be SUSPENDED. Once the device enters the
UPGRADE mode, it can only be upgraded or rebooted.
Hint: Because upgrade is done using the WEB management screen, all
management pages still work, so it is still possible to configure TEW-
212APBO before rebooting it.
Note: Upgrade function on WEB-base management supports ONLY from
previous version firmware to later one which provide the same operational
modes. I.e. Upgrade from 2.00 AP version to 2.01 AP version, or 2.00
Station version to 2.01 Station version.
Figure 27: Upgrade page
TEW-212APBO firmware is upgraded using the "Upgrade" page. In this
page, the current firmware version is shown. If there is a need to update this
42
Advertisement
Table of Contents
