Table of Contents
Advertisement
WAN settings must be set up according to the information provided by the
ISP. There is no such restriction on LAN settings. WAN access can be
disabled to restrict LAN users access to this network.
The masquerade setting enables the users to use the NAT (Network Address
Translation) feature of TEW-212APBO. When this option is enabled, TEW-
212APBO "hides" LAN addresses to the "external world". Access to the
services, such as web services, provided by servers in the LAN, can be
achieved by using the port forwarding feature.
Hint: Use known private IP addresses for the local network, because if
you use public addresses, you will not be able to connect to WAN. It is
recommended to use IANA (Internet Assigned Numbers Authority) reserved
private address space (10.0.0.0/8, 172.16.0.0/12 and 192.168.0.0/16) .
AP Mode
In AP and Bridge mode, TEW-212APBO does not require an active WAN
(Wide Area Network) interface, so the "WAN Interface Settings" table is not
displayed.
Figure 10: Network Configuration Settings page -2 (non-Router mode)
Click on the "Back" button to go back to the previous page, which is
General Configuration Settings. Click on the "Reset" button to reset all
current page fields to their previous values and click on the "Next" button to
continue wizard.
18
Advertisement
Table of Contents
