Setting up administrator password
Administrator password is a key used to access TEW-212APBO
configuration functions in administrator security required login screen
(please refer section "Starting Up"). It will be requested when setting up or
maintaining TEW-212APBO. This password is set up in the Administrator
Settings table shown in following:
Figure 21: Administrator Settings table
To change the password, you must enter the current password in "Old
Password" field, then enter a new password in the "New Password" field.
Re-enter the same value in the "Retype New Password" field. Use hard-to-
guess password, i.e. more than five characters, containing both letters and
numbers, and is not a dictionary word. Be sure to remember this password
(or write it down at a safe location) to access the TEW-212APBO
management administration features in the future. Default factory password
setting is "pass" (password is case-sensitive). This password should be
changed frequently to prevent unauthorized user access to TEW-212APBO.
Click on the "Reset" button to reset all page fields to their previous values
and click on the "Save Settings" button to save the administrator settings.
35