TRENDnet TEW-659BRV Troubleshooting Manual

300mbps wireless n vpn router
Hide thumbs Also See for TEW-659BRV:
Table of Contents
  • Contenidos del Paquete
  • Requisitos de Instalación
  • Instalación del Hardware
  • Configuración del Enrutador Inalámbrico

Advertisement

Available languages

Available languages

Quick Links

300Mbps Wireless N VPN Router
TEW-659BRV
Ÿ Guía de instalación rápida (1)
Ÿ Troubleshooting (7)
1.01

Advertisement

Table of Contents
loading

Summary of Contents for TRENDnet TEW-659BRV

  • Page 1 300Mbps Wireless N VPN Router TEW-659BRV Ÿ Guía de instalación rápida (1) Ÿ Troubleshooting (7) 1.01...
  • Page 2: Contenidos Del Paquete

    1. Compruebe que usted tiene una conexión a Internet cuando conecte su PC directamente al cable o módem DSL o Conector para Ethernet Abra su web browser, (e.g. Internet Explorer) y mecanografíe adentro un URL (e.g. http://www.trendnet.com) en la barra de la dirección. Internet Cable/DSL...
  • Page 3 2. Apague su cable módem o DSL. 6. Conecte el adaptador de alimentación al TEW-659BRV y 3. Desconecte el cable de red de su luego a una toma de corriente. Cable Módem o DSL y de su PC. Presione el botón de encendido para llevarlo a la posición de...
  • Page 4: Configuración Del Enrutador Inalámbrico

    Enter (Intro). Nota: 1. Establecer una contraseña evita que otros usuarios tengan acceso a la configuración de TEW-659BRV. 2. Se le recomienda introducir una nueva contraseña. Si decide cambiar esta configuración, escriba una nueva contraseña. 3. Contraseña De esta limitada a 9...
  • Page 5 6. Seleccione su Time Zone (Zona 9. Necesitará configurar lo siguiente: horaria) y después haga clic en Next (Siguiente). Módulo inalámbrico: Enable/Disable (Activar/Desactivar) Debe seleccionar la configuración predeterminada Enable (Activar). El ID de red (SSID): El SSID es el nombre de la red inalámbrica de su red inalámbrica (por ejemplo, 7.
  • Page 6 Next (Siguiente). Para WPA-PSK o WPA2-PSK, la clave precompartida debe tener entre 8 y 63 caracteres ASCII o 64 12. Espere mientras el TEW-659BRV caracteres HEX. Asegúrese de se reinicia y guarda los cambios. copiar la clave de encriptación.
  • Page 7 14. Abra su navegador y escriba un URL (Ej. www.trendnet.com) para comprobar que tiene conexión a Internet. La instalación ha sido completada Para obtener información más detallada sobre la configuración así como de las configuraciones avanzadas del TEW-659BRV, por favor consulte la sección de resolución de problemas, el CD-ROM de la Guía del Usuario, o el sitio Web de...
  • Page 8: Troubleshooting

    3. Make sure your TCP/IP settings are set to Obtain an IP address automatically (see the steps below). 4. Reset the TEW-659BRV. Press the button on the front of the TEW-659BRV for 20 seconds and then let go. Windows 7 1.
  • Page 9 3. Power cycle your modem and router. Unplug the power to the modem. Turn the power switch on the TEW-659BRV to the off position. Wait 30 seconds and then reconnect the power to the modem. Wait for the modem to fully boot up and then turn the power switch on the TEW-659BRV to the on position.
  • Page 10 Device is not ready Status LED Reset: Hold 20 seconds to reset device to factory defaults. WPS: Hold 3 seconds to Reset/WPS Button activate WPS. If you still encounter problems or have any questions regarding the TEW-659BRV, please contact TRENDnet's Technical Support Department.
  • Page 13 TRENDnet 20675 Manhattan Place Torrance, CA 90501. USA Copyright ©2011. All Rights Reserved. TRENDnet.

Table of Contents