Table of Contents
Advertisement
The Device Status page is divided into to four parts:
System Status table - This table shows TEW-212APBO software version,
system uptime (after last reboot), average load, memory usage and
radio signal strength (RSSI).
System service and interfaces status is shown in "Service/Interface
Status" table - This table shows wireless interface and system services
state. Possible values in this table can be Enabled/Disabled for
appropriate interface/service state.
Network status is shown in the "Network Status" table - This table
shows operating mode of the device, which can be "Router" for AP-
Router mode, "AP" – for access point mode and "Bridge" for bridge
mode.
Network statistics are shown in separate table - This table contains
statistics for both interfaces of the TEW-212APBO – wired and
wireless. The wired interface is called LAN, and the wireless interface
is called WLAN. Each column corresponds to the statistics value of the
interfaces:
TxData – amount of data transferred
TxErrors – amount of transmit errors
RxData – amount of data received
RxErrors – amount of receive errors
Collisions – amount of network collisions
13
Advertisement
Table of Contents
